Scroll to top

Product

    ENERGYN CIP(COLD ISOSTATIC PRESS)

    CIP uses ambient-temperature water as the medium for pressure. Without heating the object to be pressurized directly, the system applies pressure upon the object through the water. This pressurization method is used to minimize the defects inside ceramic or metallic materials by compacting the solid material and forming such materials evenly with a high pressure before sintering. The CIP technology of Energyn is based on the wire winding technology, which increased the pressure limit to 700MPa, while there is no limitation on the diameter required for the work zone.

    Cold isostatic pressurization

    CIP uses ambient-temperature water as the medium for pressure. Without heating the object to be pressurized directly, the system applies pressure upon the object through the water. This pressurization method is used to minimize the defects inside ceramic or metallic materials by compacting the solid material and forming such materials evenly with a high pressure before sintering. The CIP technology of Energyn is based on the wire winding technology, which increased the pressure limit to 700MPa, while there is no limitation on the diameter required for the work zone.

    The characteristics of the CIP of Energyn

    Fully automatic Operation
    The time taken fin pressurization is reduced to about 1/3.
    The pressurization time of the existing equipment About 15 minutes
    The pressurization time of the ECIP Max. 90 seconds to 1,500BAR (with ECIP 200/600)
    Ceramic powder forming and reinforcement
    Graphite compression
    Dental implant
    Ceramic filters
    High-speed tool steel
    Refractory and insulator forming
    Cylinder heads
    Sputtering target compression
    Coating engine valve components
    Other medical-grade or high-precision ceramic products
    Materials for body armors
    Space, aviation, electronics, and communication areas, etc.

    ECIP Series

    FEATURE SPECIFICATIONS
    ECIP120/360 ECIP200/600 ECIP200/900 ECIP300/1200 ECIP380/900
    Work Zone 120x360L 200x600L 200x900L Ø300×1200 Ø380×900
    Type Wet Bag Wet Bag Wet Bag Wet Bag Wet Bag
    Pressure Working Pressure 3,000bar 3,000bar 3,000bar 3,000bar 3,000bar
    Tested Pressure 3100bar 3100bar 3100bar 3100bar 3100bar
    Water 2~3 kgf/㎠ 2~3 kgf/㎠ 2~3 kgf/㎠ 2~3 kgf/㎠ 2~3 kgf/㎠
    30ℓ/min 50ℓ/min 70ℓ/min 90ℓ/min 100ℓ/min
    30℃ below 30℃ below 30℃ below 30℃ below 30℃ below
    제품크기(mm)   W*D*H 1100*800*1620 1600*950*1800 1600*950*2400
    제품무게(kg) 1000 1800 2300
    작업시간(Tack time:분) 3분* 5분* 5분*

    ※ As per standard models of Energyn. We can customize based on the work zone, pressure amount, vessel structure, dimensions, and other elements of the specification.

      Application example

      01초고압장비

      CIP